Assessing Degree Of Wear On Ceramic Brake Discs - Audi A8 2003 Workshop Manual

3 Assessing degree of wear on ceramic
brake discs
⇒ "3.1 Wear assessment by checking thickness of brake disc",
page 11
⇒ "3.2 Wear assessment according to wear indicators",
page 11
⇒ "3.3 Wear assessment by weighing brake disc", page 12
When minimum weight is stamped on hub of brake disc:
⇒ "3.4 Wear assessment by weighing brake disc", page 13
WARNING
The brake disc ring and the brake disc hub are bolted together
and must NOT be separated. Do NOT slacken the bolted con‐
nection on the brake disc hub.
Checking area of bolted connection on friction ring and brake disc
hub:
Designation of ceramic brake disc on brake disc hub
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 2003 ➤
Brake system - Edition 03.2013

3. Assessing degree of wear on ceramic brake discs

7