Maintaining the printer
If the printer does not have a caster base but is conﬁgured with optional trays, then remove the trays.
Note: Slide the latch on the right side of the optional tray toward the front of the tray until it clicks into
Use the handholds located on both sides of the printer to lift it.
Make sure your ﬁngers are not under the printer when you set it down.
Make sure there is adequate clearance around the printer.
Use only the power cord provided with this product or the manufacturer's authorized replacement.
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the
Moving the printer to another location
The printer and its hardware options can be safely moved to another location by following these precautions:
Any cart used to move the printer must have a surface able to support the full footprint of the printer.
Any cart used to move the hardware options must have a surface able to support the dimensions of the