Maintaining the printer
Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the
Push the staple cartridge into the ﬁnisher until it clicks into place.
Close the stapler door.
Moving the printer
Before moving the printer
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal
injury or printer damage:
Turn off the printer, and then unplug the power cord from the electrical outlet.
Disconnect all cords and cables from the printer.
If two or more optional ﬁnishers are installed, then remove the ﬁnishers individually from the printer.
Make sure to remove the topmost ﬁnisher ﬁrst.
To remove the ﬁnisher, hold the ﬁnisher on both sides, and then lift the latches to unlock the ﬁnisher.