Maintaining the printer
Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge.
Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge.
Push the staple cartridge into the finisher until it clicks into place.
Close the stapler door.
Moving the printer
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
Before moving the printer
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or
Turn off the printer, and then unplug the power cord from the electrical outlet.
Disconnect all cords and cables from the printer.
If two or more optional finishers are installed, then remove the finishers individually from the printer.
Make sure to remove the topmost finisher first.
To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.