Disabling Operator Panel Menus - Dell M5200 Medium Workgroup Mono Laser Printer User Manual

To configure the size of the USB input buffer.
Values:
Disabled Job buffering is disabled.
Auto* Printer automatically calculates the USB Buffer size (recommended setting).
3K to User specifies the USB Buffer size. The maximum size depends on the amount of memory in
maximum your printer, the size of the other link buffers, and whether Resource Save is set to On or
size Off. To maximize the range for the USB Buffer size, disable or reduce the size of the parallel,
allowed serial, and network buffers.
NOTE: Changing the USB Buffer menu item automatically resets the printer.
See also:
Resource Save
MAC Binary PS
Purpose:
To configure the printer to process Macintosh binary PostScript print jobs.
Values:
On Printer processes raw binary PostScript print jobs from computers using the Macintosh operating
system.
This setting often causes Windows print jobs to fail.
Off Printer filters PostScript print jobs using standard protocol.
Auto* Printer processes print jobs from computers using either Windows or Macintosh operating systems.

Disabling operator panel menus

To disable the operator panel menus so that changes cannot be made to the printer default settings:
1. Turn the printer off.
NOTE: Disabling the operator panel menus does not prevent access to the Job Menu or to Print and
Hold functionality.
2. Press and hold Select and Return and turn the printer on.
3.