System Settings; Printer Maintenance - Dell 2130cn User Manual

Printer Maintenance
The Printer Maintenance tab includes the System Settings, Paper Density, Registration Adjustment, Adjust Altitude, Reset Defaults, Non-Dell Toner,
Initialize PrintMeter, Tray Settings, TCP/IP Settings, and Network Settings pages.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.

System Settings

Purpose:
To Use these settings to configure the printer's power management, warning tones, time-out time, operator panel language setting, job log auto print,
position of the Print ID, setting of the dump print, setting of the additional memory, setting of the substitute sheet, mm/inch setting, and duplex print settings.
Values:
Power Saver Timer
1
Mode 1*
Power Saver Timer
1
Mode 2*
Audio Tones
Fault Time-Out
Time-Out
Panel Language
Auto Log Print
Print ID
Downloaded from ManualsPrinter.com Manuals
1-30 Min.
Specifies the time before the printer enters the power saver timer mode 1(sleep mode) after it
finishes a job.
3 Min.*
5-60 Min.
Specifies the time before the printer enters the power saver timer mode 2 (deep sleep mode) after
it goes into the power saver timer mode 1.
10 Min*
Off* Does not emit a tone when the operator panel input is correct.
Control Panel Tone
On Emits a tone when the operator panel input is correct.
Off* Does not emit a tone when the operator panel input is incorrect.
Invalid Key Tone
On Emits a tone when the operator panel input is incorrect.
Off* Does not emit a tone when the printer becomes ready.
Machine Ready Tone
On Emits a tone when the printer becomes ready.
Off* Does not emit a tone when a job is complete.
Job Complete Tone
On Emits a tone when a job is complete.
Off* Does not emit a tone when a job ends abnormally.
Fault Tone
On Emits a tone when a job ends abnormally.
Off* Does not emit a tone when a problem occurs.
Alert Tone
On Emits a tone when a problem occurs.
Off* Does not emit a tone when the printer runs out of paper.
Out of Paper Alert
Tone
On Emits a tone when the printer runs out of paper.
Off* Does not emit a tone when toner or some other consumable is low.
Low Toner Alert
Tone
On Emits a tone when toner or some other consumable is low.
Does not emit a tone when the operator panel display is returned to the default settings by
Off*
scrolling the loop menu.
Base Tone
Emits a tone when the operator panel display is returned to the default settings by scrolling the
On
loop menu.
0 Disables the fault time-out.
3-300 sec
Specifies the amount of time the printer cancels for a job stops abnormally.
60 sec*
0 Disables the job time-out.
5-300 sec
Specifies the amount of time before the printer cancels for jobs that stop abnormally.
30 sec*
English*
French
Italian
German
Spanish Specifies the language to be used on the operator panel.
Dutch
Danish
Norwegian
Swedish
Off* Does not automatically output a log of completed jobs from the printer.
On Outputs a log of completed jobs from the printer automatically.
Off* Does not print the user ID.
Top Left
Top Right
Prints the user ID on the specified location.
Bottom Left