RAM Disk
Purpose:
To allocate memory to the RAM disk file system for the Secure Print feature. The change takes effect after the
printer is turned off and then on.
Values:
Off
Does not allocate memory to the RAM disk file system. Secure Print job will be aborted and recorded to
the job log.
40 MB*
Sets the allocation of memory to the RAM disk file system.
80 MB
Fax Server Address Book
Purpose:
To specify whether to search the phone numbers from the LDAP server.
Values:
Off*
Does not search the phone numbers from the LDAP server.
On
Searches the phone numbers from the LDAP server.
E-mail Server Address Book
Purpose:
To specify whether to search the e-mail addresses from the LDAP server.
Values:
Off*
Does not search the e-mail addresses from the LDAP server.
On
Searches the e-mail addresses from the LDAP server.
Power On Wizard
Purpose:
To perform initial setup for the printer.
Values:
Yes
Performs the initial setup for the printer.
No*
Does not perform the initial setup for the printer.
Maintenance
Use this menu to initialize NVM (non-volatile memory), configure the plain paper quality adjustment settings, and
configure the security settings.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
F/W Version
Purpose:
To display the version of the controller.
Understanding the Printer Menus
153