Time Settings; User Accounts Settings - D-Link DGS-3000 Series Reference Manual

Weekdays
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Time Settings

Users can configure the time settings for the Switch.
To view the following window, click System Configuration > Time Settings as shown below:
The fields that can be configured are described below:
Parameter
Date (DD / MM / YYYY)
Time (HH:MM:SS)
Click the Apply button to accept the changes made.

User Accounts Settings

The Switch allows the control of user privileges.
To view the following window, click System Configuration > User Accounts Settings as shown below:
To add a new user, type in a User Name and New Password and retype the same password in the Confirm New
Password field. Choose the level of privilege (Admin, Operator, Power User or User) from the Access Right drop-down
menu.
Management
Configuration
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
minutes and seconds, based on the 24-hour time system.
Use the check boxes to select the corresponding days of the week that this time range
is to be enabled. Select the Select All Days check box to configure this time range for
every day of the week.
Figure 2-27 Time Settings window
Description
Enter the current day, month, and year to update the system clock.
Enter the current time in hours, minutes, and seconds.
Figure 2-28 User Accounts Settings window
Admin
Read/Write
Operator Power User
Read/Write– Read/Write–
partly partly
30
User
No