Chapter 2: Registration And Setup For System Administrators; Registering Local Information; Opening The Setup Menu For The Administrator - Sony PCS-1 Operating Instructions Manual

Chapter 2:
Registration and
Setup for System
Administrators
This chapter describes the registration and
settings to be carried out by the system
administrator.The chapter is intended to be
read by the system administrator.
Registering Local
Information
Before starting a conference, register the
required information on the local terminals
of the system using the Setup menu for
administrator. This section describes how to
display the Setup menus for the
administrator and gives a introduction to the
menus.
Opening the Setup Menu for
the Administrator
1
Press the MENU button on the
Remote Commander, or use the V, v,
B or b button to select "MENU" in the
launcher menu, then press the PUSH
ENTER button.
The initial Setup menu appears on the
monitor screen.
Setup
Video/Audio
Multipoint Mode
Keep pressing the [MENU] button to show
more detailed setup menus.
42

Registering Local Information

Sound Priority
Auto
Save Cancel
2
Keep the MENU button pressed.
The Setup menu for the administrator
appears on the monitor screen.
Setup
Dial
General
LAN
ISDN
Information
Encryption
Note
You can also display the Setup menu for
the administrator by pressing the numeric
button 9 on the Remote Commander twice
while the initial Setup menu (shown in step
1) or the screen in communication is
displayed.
Choosing the following items from the
Setup menu for Administrator opens the
respective menus.
Dial: Dial Setup menu (see page 43)
Answer: Answer Setup menu (see page
46)
General: General Setup menu (see page
48)
Audio: Audio Setup menu (see page 51)
LAN: LAN Setup menu (see page 53)
Administrator: Administrator Setup
menu (see page 57)
ISDN: ISDN Setup menu (see page 58)
Multipoint: Multipoint Setup menu (see
page 61)
Information: Machine Information
menu (see page 63)
Status: Status menu (see page 64)
Encryption: Encryption Setup menu
(see page 65)
SIP: SIP Setup menu (see page 66)
3
Use the V, v, B or b button on the
Remote Commander to select the
menu you want to set, then press the
PUSH ENTER button.
Answer
Audio
Administrator
Multipoint
Status
SIP