Appendix; Location And Function Of Parts And Controls; Pcs-Xc1 Hd Visual Communication System - Sony Ipela PCS-XC1 Operating Instructions Manual

Appendix

Location and
Function of Parts
and Controls
PCS-XC1 HD Visual
Communication System
Front
1
2 3 4
a Lens
This is a 12-magnification optical zoom
lens.
b
1 (power) switch
Turns on/off the system.
c POWER indicator
Lights when the power switch is set to
on and the unit is turned on.
When the unit is in standby mode, the
indicator blinks slowly (about once
every 5 sec.).
d ONLINE indicator
Lights green while dialing and during
communication.
e
Insert a USB storage device (not
supplied) here.
You can also connect a pen tablet (not
supplied) for annotation here.
Note
Do not connect small USB devices (e.g.,
pen tablet receivers) here, as they may
become impossible to remove. Connect
small devices to the USB port on the rear
of the unit.
Rear
1 2
a Kensington Security Slot
Connect an anti-theft security cable
5
here.
b HDMI IN (PC) connector
Connect to the HDMI output connector
of a computer.
Note
We recommend using Sony HDMI cables.
c HDMI OUT connector
Connect to the HDMI input of an
optional TV monitor, etc.
CAUTION
When you connect the HDMI cable of the
unit to peripheral device, use the supplied
cable to prevent malfunction due to
radiation noise.

Location and Function of Parts and Controls

(USB) port
3 4 5 6 7 8
155