Download  Print this page

Standby Mode Function; Setting The Video Communication System To Standby Mode - SONY IPELA PCS-HG90 Operating Instructions Manual

High definition 1080i visual codec.
Hide thumbs

Advertisement

Standby Mode Function

To save power, the Communication Terminal can enter standby mode if you
do not operate it for a specified period of time.
When the Communication Terminal is in standby mode, the STANDBY
indicator on the Camera Unit and the POWER/STANDBY indicator on the
Communication Terminal light in orange.
You can turn on the Video Communication System with any button on the
Remote Commander if it is in standby mode.
Once the Communication Terminal receives a call, the standby mode is
automatically released.

Setting the Video Communication System to Standby Mode

1
Display the launcher menu on the monitor screen, then press the
on the Remote Commander.
The message "Standby?" appears on the monitor screen.
2
Press the B or b button on the Remote Commander to select "OK", and
press the PUSH ENTER button.
You may press the @/1 button on the Remote Commander.
MIC
ON/OFF
VOLUME
PRESENTATION
DISPLAY
CLEAR
PinP
BACK
SPACE
RETURN
CONNECT/
DISCONNECT
The Video Communication System enters standby mode and the STANDBY
indicator on the Camera Unit and the POWER/STANDBY indicator on the
Communication Terminal light in orange.
Note
When the Communication Terminal and the Camera Unit are separately installed,
point the Remote Commander to the Camera Unit for operations.
26
Turning the System On/Off
@
1
/
button
ZOOM
VIDEO INPUT
SYMBOL
FAR/NEAR
ALPHA/
NUM
B/b buttons and
PUSH
ENTER
PUSH ENTER button
MENU
STANDBY indicator
(Lights in orange.)
POWER/STANDBY
indicator (Lights in orange.)
@
/
1
button

Advertisement

Table of Contents

   Related Manuals for SONY IPELA PCS-HG90

Comments to this Manuals

Symbols: 0
Latest comments: