SC-F7100 Series/SC-F7000 Series
Cleaning Around the Print Head
Inspect the area around the print head and remove any
ink stains as described below.
A
Use a cleaning stick to wipe the locations of
and B.
c
Important:
Use a narrow cleaning stick to clean between
the nozzles. Touching the nozzle (
section in the illustration) with the cleaning
stick could damage the print head.
A
Nozzle area:
Clean as shown in the illustration.
B
Other areas:
Wipe adhered ink, lint, and dust. When lint or
dust is caught, hook it with the tip of a
cleaning stick.
User's Guide
Maintenance
B
A
73
Ink spatters on the base of the print head can be
removed using a clean room wiper (available in
the market).
c
Important:
❏ Be sure not to touch the nozzle surface
during cleaning. Failure to observe this
precaution could damage the print
head.
❏ The parts shown below are sensors. Be
careful not to touch this area with your
hands or clean room wiper. Failure to
observe this precaution could affect
print quality.