SC-F7100 Series/SC-F7000 Series
U
USB port
Connects the USB cable.
V
Maintenance cover (right)
Open this cover to perform maintenance around the print head. Normally closed when using the printer.
"Maintenance Around the Print Head" on page 71
U
W
Media loading lever
After loading media, lower the media loading lever to keep the media in place. Raise the lever to release the media
prior to removal.
X
Alert lamp
This lamp lights or flashes when an error occurs.
On/Flashing : An error occurred. the type of error is indicated by how the lamp lights or flashes. Check the
contents of the error on the control panel's screen.
Off
: No error.
Y
Control panel
"Control panel" on page 17
U
Z
Front cover
Open when loading media, cleaning the inside of the printer, or removing jammed media. Normally closed when
using the printer.
User's Guide
Introduction
12