Inspecting/Cleaning Around The Print Head - Epson ML-13000 User Manual

ML-13000 User's Manual
G
Insert the flushing pad as shown in the illustration, and place it in its original position.
H
Check that the flushing pad is not floating up. If the flushing pad is floating up, place it again.
I
Use tap water to thoroughly wash the containers used to clean the flushing pads.
J
Close the maintenance cover (left) and the front cover.
K
Touch the Complete button on the control panel.
The print head moves to the left side of the printer.

Inspecting/Cleaning Around the Print Head

If any of the following problems occur, check the print head and clean it if there are any ink clots, lint, or dust.
❏ Print head striking
❏ Print results are dirty
Maintenance
182