SC-F7100 Series/SC-F7000 Series
D
Insert the roll core into the right roll holder.
Insert the left roll core holder into the roll core,
and then tighten the roll core holder locking
screw.
E
Rotate the handle until part A in the illustration
below is fully inserted.
User's Guide
Appendix
F
135
Move the adjustment paper to a position 5 cm
from the left edge of the roll core, and then insert
it into the printer. Keep the adjustment paper
taut, place a ruler on the front side of the white
line on the platen, and then draw a line with a pen
or other writing instrument.
Pass the lead edge of the adjustment paper
between the after heater and media guide bar,
and then insert it into the printer.