Epson SC-F7100 series User Manual page 127

SC-F7100 Series/SC-F7000 Series
K
At the rear of the printer, remove the
counterweight attached to film a.
L
Pull out film a from the printer.
M
Bring film a to the left side of film b.
Pass the lead edge of film a by the front of the
media guide bar and then insert it into the
printer.
User's Guide
Appendix
N
O
127
At the front and rear of the printer, raise film a
and move it so that it aligns with film b tightly.
At the rear of the printer, attach a counterweight
to film a.
a
b
After film a stops swinging, record the value of
the scale on the front side of the white line of the
platen.
a b