Table of Contents
Advertisement
SC-F7100 Series/SC-F7000 Series
The Maintenance Menu
The Maintenance menu can be accessed directly by pressing the # button.
Item
Nozzle Check
Print At Right
Print At Center
Print At Left
Cleaning
All Nozzles
Selected Nozzles
Head Maintenance
Waste Ink Counter
User's Guide
Using the Control Panel Menu
Parameter
Explanation
Print
A nozzle pattern will be printed. Inspect the pattern visually and perform
head cleaning if you detect faint or missing colors.
"Checking for clogged nozzles" on page 69
U
The menu displayed in the setting items depends on the Media Size Check
setting and the width of the loaded media.
Execute (Light)/
Note the numbers of patterns that contain faint or missing colors and
Execute (Medium)/
clean all or selected nozzles. All Nozzles performs head cleaning for all
Execute (Heavy)
nozzles. Choose Selected Nozzles to clean only the nozzles in selected
arrays.
Execute (Light)/
The level of cleaning can be selected from Execute (Light), Execute
Execute (Medium)/
(Medium), and Execute (Heavy). Select Execute (Light) first. If the
Execute (Heavy)
problem persists after you have used Execute (Light), choose Execute
(Medium). If the problem persists after you have used Execute (Medium),
choose Execute (Heavy).
"Head Cleaning" on page 70
U
Move Head
Position the print head for maintenance. Perform such maintenance as
cleaning the wiper, caps, and the area around print head only after using
this option to position the head for cleaning. Moving the print head
manually could cause malfunction.
"Maintenance Around the Print Head" on page 71
U
-
If you replace the Waste Ink Bottle before being prompted by a message
indicating the replacement interval of the Waste Ink Bottle in the control
panel, run the Waste Ink Counter option after replacement.
98
Advertisement
Table of Contents
