Inside - Epson SC-F7100 series User Manual

SC-F7100 Series/SC-F7000 Series

Inside

Dirt on any of the following parts may reduce print quality. Regularly clean or exchange these parts as described in the
chapters listed in the reference sections below.
A
Print head
The print head prints by moving left and right while emitting ink. Cleaning may be required depending on the
status.
"Cleaning Around the Print Head" on page 73
U
B
Media holding plate
The media holding plates prevent the media riding up and keeps fibers on the cut edge of the media from touching
the print head. Position the plates at either side of the media before printing.
"Loading Media (SC-F7100 Series)" on page 28
U
"Loading Media (SC-F7000 Series)" on page 33
U
C
Cutter groove
Pass the blade of a cutter (available in the market) down this groove to cut media.
D
Pressure rollers
These rollers press down on the media during printing.
"Cleaning the Platen, Pressure Rollers, and Media Holding Plates" on page 68
U
E
Platen
This part suctions the media for printing.
"Cleaning the Platen, Pressure Rollers, and Media Holding Plates" on page 68
U
User's Guide
Introduction
14