Using Ink Cleaner; Cleaning; Cleaning Around The Print Head - Epson SC-F9200 series User Manual

SC-F9200 Series User's Guide
Note:
The buzzer sounds 10 minutes after the print head is
moved (default setting). Press the Z button to continue
the cleaning process. After 10 more minutes have passed,
the buzzer sounds again.

Using Ink Cleaner

Use ink cleaner to clean around the print head and
around the caps only. Using ink cleaner on other parts of
the printer could damage the product.
Before starting this procedure, be sure to read the
following:
"Precautions regarding maintenance" on page 57
U
A
Put the cup supplied with the maintenance kit on
the tray, and pour approximately 10 ml of ink
cleaner into the cup.
Maintenance
B
Dampen the cleaning stick with ink cleaner.
Do not allow ink cleaner to drip from the
cleaning stick.
c
Important:
❏ Rinse a cleaning stick using ink cleaner for
each step.
❏ Do not reuse ink cleaner.
❏ Used ink cleaner and cleaning sticks are
industrial waste. Dispose of them in the
same way as for waste inks.
U
page 86
❏ Store ink cleaner at room temperature out
of direct sunlight.
❏ After using the ink cleaner, make sure you
close the cap.

Cleaning

Cleaning Around the Print Head

Inspect the area around the print head and remove any
ink, lint, or dust as described below. The printer has two
print heads. Clean both.
Before starting this procedure, be sure to read the
following:
"Precautions regarding maintenance" on page 57
U
A
Position the print head for maintenance
purposes.
"Moving the Print Head" on page 58
U
59
"Disposal of Used Consumables" on