Table of Contents
Advertisement
SC-F7100 Series/SC-F7000 Series
Parallel adjustment using Tool A
Parts used in the following adjustment
The SC-F7100 Series includes two types of hexagon
wrenches. For parallel adjustment of the Media Feeding
Unit, use the large hexagon wrench.
a
Note:
When the film will be reused, the adhesive side may be
soiled. Soak a lint-free cloth in water, wring it out, and
then use it to wipe away the dust and lint stuck to the
reverse side.
Media Feeding Unit
A
Confirm that the printer is off.
B
Open the front cover and raise the media loading
lever.
User's Guide
Appendix
C
b
D
119
On the rear side of the printer, use the large
hexagon wrench to loosen the four fixing screws
in the illustration.
Pass the left and right sides of film b from the rear
to the front.
Advertisement
Table of Contents
