SC-F7100 Series/SC-F7000 Series
H
Perform parallel adjustment.
After attaching the media guide bar, read the
following section, and then proceed to parallel
adjustment.
User's Guide
Appendix
Parallel adjustment
In the following cases, perform parallel adjustment for
the Media Feeding Unit and Auto Take-up Reel Unit.
❏ There are problems with media feeding
❏ There are problems with take-up
❏ The printer has been moved
Parallel adjustment requires two persons because the
front and rear side of the printer must be checked and
adjusted simultaneously.
Perform parallel adjustment using the included roll core
and adjustment tools. Two types of adjustment tools
may be included. When both A and B are included, use
A.
For parallel adjustment using A, read the next section.
For parallel adjustment using B, read the following.
U
118
A
B
"Parallel adjustment using Tool B" on page 129