Table of Contents
Advertisement
SC-F7100 Series/SC-F7000 Series
R
Ink tank
Holds ink used for printing.
S
Slider
"Slider" on page 13
U
T
Lock lever
Raise the lock lever to unlock the slider for removal when replacing the chip unit. Always lower the lock lever into
the locked position after inserting the slider.
U
Chip unit check lamp
This lamp turns on when a message related to the chip unit is displayed.
On
: Check the contents of the error on the control panel's screen and deal with the error.
Off
: No error.
V
AC inlet #1/AC inlet #2
Connects the power cable. Be sure to connect both cables.
W
LAN port
"LAN port" on page 13
U
X
USB port
Connects the USB cable.
Y
Maintenance cover (right)
Open this cover to perform maintenance around the print head. Normally closed when using the printer.
"Maintenance Around the Print Head" on page 71
U
Z
Media loading lever
After loading media, lower the media loading lever to keep the media in place. Raise the lever to release the media
prior to removal.
a
Alert lamp
This lamp lights or flashes when an error occurs.
On/Flashing : An error occurred. the type of error is indicated by how the lamp lights or flashes. Check the
contents of the error on the control panel's screen.
Off
: No error.
b
Control panel
"Control panel" on page 17
U
c
Front cover
Open when loading media, cleaning the inside of the printer, or removing jammed media. Normally closed when
using the printer.
User's Guide
Introduction
9
Advertisement
Table of Contents
