Table of Contents
Advertisement
SC-F7100 Series/SC-F7000 Series
F
Wiper cleaner
The wiper cleaner removes ink from the wiper. It is a consumable; replacement may be required depending on the
status.
"Replacing the Wiper and Wiper Cleaner" on page 78
U
G
Caps
Except during printing, these caps cover the print head nozzles to prevent them drying out. Cleaning may be
required depending on the status.
"How to Clean" on page 72
U
H
Wiper
The wiper removes ink from the print head nozzles. It is a consumable; cleaning or replacement may be required
depending on the status.
"How to Clean" on page 72
U
"Replacing the Wiper and Wiper Cleaner" on page 78
U
Back
A
Drive switch
The drive switch is used to feed the media during loading and to rewind the media for replacement.
B
Roll holder
Place media on these holders. There are two supports: one on the left and one on the right.
C
Roll holder fixing screw
These screws fix the roll holders in place once the media has been installed. There are two supports: one on the left
and one on the right.
User's Guide
Introduction
15
Advertisement
Table of Contents
