Epson SC-F7100 series User Manual page 60

SC-F7100 Series/SC-F7000 Series
B
Use the d/u buttons to select the desired setting
and press the Z button.
For faster printing, select Data Width.
For even, high-quality printing, select Printer
Full Width.
C
Press the y button to return to the customize
settings menu.
Multi-Strike Printing
Choose the number of times each line is printed.
A
Use the d/u buttons to select Multi-Strike
Printing and press the Z button.
B
Use the d/u buttons to choose a value.
C
After finishing the configuration, press the Z
button.
D
Press the y button to return to the customize
settings menu.
Roll Type
Choose Printable Side Out or Printable Side In
according to how the media is rolled.
A
Use the d/u buttons to select Roll Type and
press the Z button.
B
Use the d/u buttons to select the desired setting
and press the Z button.
C
After finishing the configuration, press the Z
button.
D
Press the y button to return to the customize
settings menu.
Tension Measurement
Periodically is recommended in most circumstances.
Off is displayed for the SC-F7000 Series only. Choose
Off if slack develops in the media or other printing
problems occur.
User's Guide
Basic Operations
A
B
C
D
Feeding Tension (SC-F7100 Series)
Feeding Tension has 2 settings: Auto and Manual.
The default setting of Auto is recommended in most
situations. If creases appear during printing or black
bands (dark stripes) appear in the print results, set
Feeding Tension to Manual. We recommend setting
Feeding Tension to the value below that complies the
width of the loaded media.
A: Value of Feeding Tension (when Tension
Measurement is Periodically/Every Page)
Recommended values for Feeding Tension by media
width
If you have previously performed Feed Adjustment, you
will need to perform it again after adjusting Feeding
Tension.
U
A
B
60
Use the d/u buttons to select Tension
Measurement and press the Z button.
Use the d/u buttons to select the desired setting
and press the Z button.
After finishing the configuration, press the Z
button.
Press the y button to return to the customize
settings menu.
64 52 44
Lv28 Lv23 Lv19
A
"Feed Adjustment" on page 58
Use the d/u buttons to select Feeding Tension
and press the Z button.
Use the d/u buttons to select the item you want
to change.
Selecting Auto
(1) Select Auto and press the Z button.
(2) Confirm that the checkbox has been selected
and press the Z button.
(3) Press the y button to return to the customize
settings menu.
42 36 24
Lv19 Lv16 Lv11