Table of Contents
Advertisement
SC-F7100 Series/SC-F7000 Series
S
Rewind the leading edge of the media to the front
cover.
For media with the printable side out, press the u
button. For media with the printable side in,
press the d button.
Confirm that the paper was fed straight with the
media straight and taut.
Note:
We recommend using the r button on the control
panel to set Media Suction to 2. The media is
rewound straight.
T
Open the front cover.
U
Lower the media loading lever to hold the media
in place.
User's Guide
Basic Operations
V
32
Attach the media holding plates.
First, position the plates so that the edges of the
media are at the centers of the round holes.
c
Important:
Always position the plates so that the edges
of the media are at the centers of the round
holes. Incorrect positioning causes banding
(horizontal banding, lines, or strips of
uneven color) during printing.
Advertisement
Table of Contents
