Removing The Take-Up Roll (Sc-F7000 Series) - Epson SC-F7100 series User Manual

SC-F7100 Series/SC-F7000 Series
D
Set the Auto switch to
E
Lower the tensioner.
User's Guide
Basic Operations
F
.
G
Removing the Take-up Roll
(SC-F7000 Series)
This section describes how to remove media from the
take-up reel.
55
Confirm that the media is attached without
deformation.
As shown in the identified sections in the
illustration below, if the tensions of the left and
right edges of the media are different, the media
cannot be taken up correctly. If there is slack on
one side, repeat from Step 1.
Note:
As shown in the illustration below, you can
confirm differences in tension by lightly tapping
on both edges of the media.
Press the d button to feed the media until the
take up roll core begins to turn.
c
Important:
The Auto Take-up Reel Unit will not
function if the tensioner is raised.