Menu List - Epson SC-F7100 series User Manual

SC-F7100 Series/SC-F7000 Series

Menu List

The following items and parameters can be set and executed in the Menu. See the reference pages for more details on
each item.
Setting items: *1: SC-F7100 Series only; *2: SC-F7000 Series only.
Menu Item
Media Setup Media Remaining
"The Media
U
Remaining Setup
Setup Menu" on
page 91
Length
Remaining Alert
Print Remaining Length
Select Media
Customize Settings
Current Settings
RIP Settings
User's Guide
Using the Control Panel Menu
Platen Gap
Head Alignment
Input thickness.
Roll Type
Tension Measurement
*1
Feeding Tension
Auto
Manual
*1
Take-up Tension
Auto
Manual
*2
Media Tension
Restore Settings
Parameter
ON, OFF
1.0 to 999.5 m (3 to 3000 ft)
1 to 15 m (4 to 50 ft)
Print
RIP Settings, 1 to 30 (media setting bank number)
Change settings for currently selected media. The options
available depend on whether RIP Settings or a media setting
bank is selected. More information on the options available
can be found below in the entries for RIP Settings and media
setting banks 1 to 30.
1.5, 2.0, 2.5
0.1 to 1.0 mm (4 to 40 mil)
Printable Side Out, Printable Side In
Periodically,Every Page, Off
-
0 to 40
-
1 to 6
0 to 40
Yes, No
87
*2