Epson SC-F7100 series User Manual page 141

SC-F7100 Series/SC-F7000 Series
E
Insert the roll core into the right roll holder.
Insert the left roll core holder into the roll core,
and then tighten the roll core holder locking
screw.
c
Important:
Insert the left roll holder into the roll core
until part A in the illustration below cannot
be seen, and then tighten the roll holder
locking screw.
User's Guide
Appendix
F
141
Move the adjustment paper to a position 5 cm
from the left edge of the roll core, and then insert
it into the printer. Keep the adjustment paper
taut, place a ruler on the front side of the white
line on the platen, and then draw a line with a pen
or other writing instrument.