Table of Contents
Advertisement
SC-F7100 Series/SC-F7000 Series
❏ Touch a metallic object before starting work to
discharge any static electricity.
How to Clean
To preserve print quality and ensure good results, clean
around the print head as suggested below.
❏ When colors in the printout are faint or missing
even after head has been cleaned.
❏ When the printout is smudged.
Clean the parts in the following order.
(1) Print head
(2) Wiper
(3) Caps
(4) Wiper rail
Moving the Print Head
This section describes how to position the print head for
part cleaning.
c
Important:
Be sure to follow the steps below when positioning
the print head. Moving the print head manually
could cause malfunction.
Buttons that are used in the following settings
User's Guide
Maintenance
A
B
C
D
72
Confirm that the printer is on and press #.
The Maintenance menu will be displayed.
Use the d/u buttons to select Head
Maintenance and press the Z button.
Press the Z button to move the print head to the
cleaning position.
Open the maintenance covers at each end.
Advertisement
Table of Contents
