Configuring An Interface For Rsvp Authentication; Specifying The Rsvp Authentication Keychain In Interface Mode - Cisco ASR 9000 Series Configuration Manual

Configuring an Interface for RSVP Authentication

Command or Action
window-size 33
Step 4 Use the commit or end command.
Related Topics
Guidelines for Window-Size and Out-of-Sequence Messages, on page 73
RSVP Authentication by Using All the Modes: Example, on page 103
RSVP Authentication for an Interface: Example, on page 102
Configuring an Interface for RSVP Authentication
These tasks describe how to configure an interface for RSVP authentication:

Specifying the RSVP Authentication Keychain in Interface Mode

Perform this task to specify RSVP authentication keychain in interface mode.
You must configure a keychain first (see Cisco ASR 9000 Series Aggregation Services Router System Security
Configuration Guide).
SUMMARY STEPS
1. configure
2. rsvp interface type interface-path-id
3. authentication
4. key-source key-chain key-chain-name
5. Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
88
Purpose
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without committing
the configuration changes.
Implementing RSVP for MPLS-TE
OL-28381-02