Configuring The Isdn Bri Interface - Cisco 2500 Series Installation And Configuration Manual

Configuring the Router
Country: ISDN Switch Type Description
Australia
Europe
Japan
New Zealand
North America

Configuring the ISDN BRI Interface

This section explains how to configure the ISDN BRI interface. If an ISDN BRI WAN module is not installed
in your router, skip this section and proceed with the next section,
Interfaces."
The ISDN BRI interface is configured to allow connection to ISDN WANs. Take the following steps to
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2520/2520_23/c2520cfg.htm (8 of 16) [10/27/2000 3:07:51 PM]
Table 4-1: ISDN Switch Types
Australian TS013 switches
basic-ts013
German 1TR6 ISDN switches
basic-1tr6
Norwegian NET3 ISDN switches (phase 1)
basic-nwnet3
NET3 ISDN switches (UK and others)
basic-net3
NET5 switches (UK and Europe)
basic-net5
French VN2 ISDN switches
vn2
French VN3 ISDN switches
vn3
German 1TR6 ISDN switches
basic-1tr6
Norwegian NET3 ISDN switches (phase 1)
basic-nwnet3
Japanese NTT ISDN switches
ntt
New Zealand NET3 switches
basic-nznet3
AT&T basic rate switches
basic-5ess
NT DMS-100 basic rate switches
basic-dms100
National ISDN-1 switches
basic-ni1
"Configuring the Ethernet or Token Ring