Configuring Connection Diversity - Cisco ASR 9000 Series Configuration Manual

Configuring TE for GMPLS UNI
Command or Action
Step 6
path-option 10 no-ero [xro-attribute-set name ]
lockdown
Example:
RP/0/RSP0/CPU0:router(config-te-gmpls-tun)#
path-option 10 no-ero xro-attribute-set A01
lockdown
Step 7 Use the commit or end command.

Configuring Connection Diversity

Perform this task to specify exclusions for an attribute set for LSP diversity, under MPLS-TE attribute-set
configuration mode.
SUMMARY STEPS
1. configure
2. mpls traffic-eng
3. attribute-set xro name
4. exclude {best-effort | strict} lsp source source-address destination destination-address tunnel-id
tunnel-id extended-tunnel-id extended-tunnel-id [lsp-id lsp-id]
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
288
Purpose
Specifies the path-option for a headend router of a GMPLS
tunnel.
commit—Saves the configuration changes and remains within
the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without committing
the configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Purpose
Enters global configuration mode.
Implementing GMPLS UNI
OL-28381-02