Configuring Local Label Allocation Control - Cisco ASR 9000 Series Configuration Manual

Implementing MPLS Label Distribution Protocol
Related Topics
Label Acceptance Control (Inbound Filtering), on page 14
Configuring Label Acceptance (Inbound Filtering): Example, on page 55

Configuring Local Label Allocation Control

Perform this task to configure label allocation control.
By default, local label allocation control is disabled and all non-BGP prefixes are assigned local labels.
Note
SUMMARY STEPS
1. configure
2. mpls ldp
3. label allocate for prefix-acl
4. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 mpls ldp
Example:
RP/0/RSP0/CPU0:router(config)# mpls ldp
Step 3 label allocate for prefix-acl
Example:
RP/0/RSP0/CPU0:router(config-ldp)# label
allocate for pfx_acl_1
Step 4 Use the commit or end command.
OL-28381-02
Purpose
Enters global configuration mode.
Enters the MPLS LDP configuration mode.
Configures label allocation control for prefixes as specified by
prefix-acl.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring Local Label Allocation Control
37