Configuring Auto-Tunnel Mesh Unused Timeout - Cisco ASR 9000 Series Configuration Manual

Implementing MPLS Traffic Engineering
Command or Action
Step 5
Use the commit or end command.
Related Topics
Auto-Tunnel Mesh, on page 153
Destination List (Prefix-List), on page 154

Configuring Auto-tunnel Mesh Unused Timeout

Perform this task to configure a global timer to remove unused auto-mesh tunnels.
SUMMARY STEPS
1. configure
2. mpls traffic-eng
3. auto-tunnel mesh
4. timer removal unused timeout
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
OL-28381-02
Purpose
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
• No—Exits the configuration session without committing the
• Cancel—Remains in the configuration mode, without
Purpose
Enters global configuration mode.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring Auto-tunnel Mesh Unused Timeout
configuration session.
configuration changes.
committing the configuration changes.
245