Cisco ASR 9000 Series Configuration Manual page 309

Implementing GMPLS UNI
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 lmp
Example:
RP/0/RSP0/CPU0:router(config)# lmp
Step 3 gmpls optical-uni
Example:
RP/0/RSP0/CPU0:router(config-lmp)# gmpls
optical-uni
Step 4 controller dwdm controller
Example:
RP/0/RSP0/CPU0:router(config-lmp-gmpls-uni)#
controller dwdm 0/4/0/0
Step 5 neighbor name
Example:
RP/0/RSP0/CPU0:router(config-lmp-gmpls-uni-cntl)#
neighbor nbr1
Step 6 link-id ipv4 unicast address
Example:
RP/0/RSP0/CPU0:router(config-lmp-gmpls-uni-cntl)#
link-id ipv4 unicast 10.2.2.4
Step 7 neighbor link-id ipv4 unicast address
Example:
RP/0/RSP0/CPU0:router(config-lmp-gmpls-uni-cntl)#
neighbor link-id ipv4 unicast 10.10.4.4
OL-28381-02
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring LMP for GMPLS UNI
Purpose
Enters global configuration mode.
Enters LMP configuration mode.
Enters GMPLS UNI configuration submode.
Specifies a controller for GMPLS UNI.
Specifies an LMP neighbor for GMPLS and enters LMP
GMPLS UNI neighbor configuration submode.
Specifies the optical interface address for an LMP link for
a GMPLS UNI controller.
Specifies the neighbor's optical address of an LMP link
for a GMPLS UNI controller.
293