Additional References - Cisco ASR 9000 Series Configuration Manual

Implementing MPLS Forwarding
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)#interface
tunnel-te 1
Step 3
mpls label-security rpf
Example:
RP/0/RSP0/CPU0:router(config-if)#mpls
label-security rpf
Step 4
Use the commit or end command.

Additional References

For additional information related to implementing MPLS Forwarding, refer to the following references:
Related Documents
Related Topic
MPLS Forwarding commands
OL-28381-02
Purpose
Enters global configuration mode.
Enters the interface configuration mode.
Configures the MPLS label security on the specified interface and
checks for RPF label on incoming packets.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Document Title
MPLS Forwarding Commands on Cisco ASR 9000
Series Router module in Cisco ASR 9000 Series
Aggregation Services Routers MPLS Command
Reference
Additional References
111