Configuring Admin-Weight Associated With An Srlg Value - Cisco ASR 9000 Series Configuration Manual

Implementing MPLS Traffic Engineering
Command or Action

Configuring Admin-Weight Associated with an SRLG Value

Perform this task to configure admin-weight associated with an SRLG value. This admin-weight will be added
to the link admin weight during SRLG aware path calculation when the link matches the SRLG value of the
protected link. The admin-weight configured in the MPLS TE SRLG value configuration mode overwrites
the admin-weight configured in the MPLS TE SRLG configuration mode.
SUMMARY STEPS
1. configure
2. mpls traffic-eng srlg
3. value srlg-value
4. admin-weight weight
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 mpls traffic-eng srlg
Example:
RP/0/RSP0/CPU0:router(config)# mpls
traffic-eng srlg
Step 3
value srlg-value
Example:
RP/0/RSP0/CPU0:router(config-mpls-te-srlg)#
value 150
Step 4
admin-weight weight
Example:
RP/0/RSP0/CPU0:router(config-mpls-te-srlg)#
admin-weight 100
OL-28381-02
Purpose
• Cancel—Remains in the configuration mode, without
Purpose
Enters global configuration mode.
Enters MPLS TE SRLG configuration mode.
Enters MPLS TE SRLG value configuration mode and configures
SRLG value. The example shows how to enter MPLS TE SRLG
value configuration mode and configure a SRLG value of 150.
Configures admin-weight for SRLG value. Range is from
0-4294967295. Default is 1. The example shows how to configure
an admin-weight of 100 for the SRLG value of 150.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring the Shared Risk Link Groups
committing the configuration changes.
227