Configuring The Window Size For Rsvp Authentication In Global Configuration Mode - Cisco ASR 9000 Series Configuration Manual

Implementing RSVP for MPLS-TE
Command or Action
Related Topics
Global, Interface, and Neighbor Authentication Modes, on page 70
RSVP Authentication Global Configuration Mode: Example, on page 102

Configuring the Window Size for RSVP Authentication in Global Configuration Mode

Perform this task to configure the window size for RSVP authentication in global configuration mode.
SUMMARY STEPS
1. configure
2. rsvp authentication
3. window-size N
4. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
rsvp authentication
Example:
RP/0/RSP0/CPU0:router(config)# rsvp
authentication
RP/0/RSP0/CPU0:router(config-rsvp-auth)#
Step 3 window-size N
Example:
RP/0/RSP0/CPU0:router(config-rsvp-auth)#
OL-28381-02
Purpose
• Cancel—Remains in the configuration mode, without committing
the configuration changes.
Purpose
Enters global configuration mode.
Enters RSVP authentication configuration mode.
Specifies the maximum number of RSVP authenticated messages that
can be received out-of-sequence.
N
Size of the window to restrict out-of-sequence messages. The
range is from 1 to 64. The default value is 1, in which case all
out-of-sequence messages are dropped.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring Global Configuration Mode RSVP Authentication
87