Configuring Attributes Within A Path-Option Attribute - Cisco ASR 9000 Series Configuration Manual

Configuring Attributes within a Path-Option Attribute

Command or Action
Step 4 Use the commit or end command.
Related Topics
Soft-Preemption, on page 150
Configuring Attributes within a Path-Option Attribute
Perform this task to configure attributes within a path option attribute-set template.
SUMMARY STEPS
1. configure
2. mpls traffic-eng
3. attribute-set path-option attribute-set-name
4. affinity affinity-value mask mask-value
5. signalled-bandwidth kbps class-type class-type number
6. Use the commit or end command.
7. show mpls traffic-eng attribute-set
8. show mpls traffic-eng tunnelsdetail
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
242
Purpose
commit—Saves the configuration changes and remains within the configuration
session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration session.
• No—Exits the configuration session without committing the configuration
changes.
• Cancel—Remains in the configuration mode, without committing the
configuration changes.
Purpose
Enters global configuration mode.
Implementing MPLS Traffic Engineering
OL-28381-02