Configuring A Lifetime For An Interface For Rsvp Authentication - Cisco ASR 9000 Series Configuration Manual

Configuring an Interface for RSVP Authentication

Configuring a Lifetime for an Interface for RSVP Authentication

Perform this task to configure a lifetime for the security association for an interface.
SUMMARY STEPS
1. configure
2. rsvp interface type interface-path-id
3. authentication
4. life-time seconds
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 rsvp interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# rsvp
interface POS 0/2/1/0
RP/0/RSP0/CPU0:router(config-rsvp-if)#
Step 3 authentication
Example:
RP/0/RSP0/CPU0:router(config-rsvp-if)#
authentication
RP/0/RSP0/CPU0:router(config-rsvp-if-auth)#
Step 4 life-time seconds
Example:
RP/0/RSP0/CPU0:router(config-rsvp-if-auth)#
life-time 2000
Step 5
Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
90
Purpose
Enters global configuration mode.
Enters RSVP interface configuration mode.
Enters RSVP authentication configuration mode.
Controls how long RSVP maintains security associations with other
trusted RSVP neighbors.
seconds
Length of time (in seconds) that RSVP maintains idle
security associations with other trusted RSVP neighbors.
Range is from 30 to 86400. The default value is 1800.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
Implementing RSVP for MPLS-TE
OL-28381-02