Forcing The Current Application Period To Expire Immediately - Cisco ASR 9000 Series Configuration Manual

Configuring the Automatic Bandwidth
Command or Action
Step 5
show mpls traffic-eng tunnels [auto-bw]
Example:
RP/0/RSP0/CPU0:router# show mpls traffic
tunnels auto-bw
Related Topics
MPLS-TE Automatic Bandwidth Overview, on page 138
Configure Automatic Bandwidth: Example, on page 259

Forcing the Current Application Period to Expire Immediately

Perform this task to force the current application period to expire immediately on the specified tunnel. The
highest bandwidth is applied on the tunnel before waiting for the application period to end on its own.
SUMMARY STEPS
1. mpls traffic-eng auto-bw apply {all | tunnel-te tunnel-number}
2. Use the commit or end command.
3. show mpls traffic-eng tunnels [auto-bw]
DETAILED STEPS
Command or Action
Step 1 mpls traffic-eng auto-bw apply {all |
tunnel-te tunnel-number}
Example:
RP/0/RSP0/CPU0:router# mpls
traffic-eng auto-bw apply tunnel-te 1
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
208
Purpose
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without committing
the configuration changes.
Displays information about MPLS-TE tunnels for the automatic
bandwidth. The globally configured collection frequency is displayed.
Purpose
Configures the highest bandwidth available on a tunnel without waiting
for the current application period to end.
all
Configures the highest bandwidth available instantly on all the
tunnels.
tunnel-te
Configures the highest bandwidth instantly to the specified tunnel.
Range is from 0 to 65535.
Implementing MPLS Traffic Engineering
OL-28381-02