Cisco ASR 9000 Series Configuration Manual page 95

Implementing RSVP for MPLS-TE
SUMMARY STEPS
1. configure
2. rsvp
3. signalling prefix-filtering default-deny-action
4. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 rsvp
Example:
RP/0/RSP0/CPU0:router(config)# rsvp
Step 3
signalling prefix-filtering default-deny-action
Example:
RP/0/RSP0/CPU0:router(config-rsvp)#
signalling prefix-filtering
default-deny-action
Step 4 Use the commit or end command.
Related Topics
Overview of RSVP for MPLS-TE , on page 64
Set DSCP for RSVP Packets: Example, on page 101
OL-28381-02
Purpose
Enters global configuration mode.
Enters the RSVP configuration mode.
Drops RA messages.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
• No—Exits the configuration session without committing the
• Cancel—Remains in the configuration mode, without
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring ACL-based Prefix Filtering
configuration session.
configuration changes.
committing the configuration changes.
79