Cisco ASR 9000 Series Configuration Manual page 186

Establishing MPLS Backup AutoTunnels to Protect Fast Reroutable TE LSPs
SUMMARY STEPS
1. configure
2. mpls traffic-eng
3. interface type interface-path-id
4. auto-tunnel backup
5. attribute-set attribute-set-name
6. Use the commit or end command.
7. show mpls traffic-eng auto-tunnel backup summary
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 mpls traffic-eng
Example:
RP/0/RSP0/CPU0:router(config)# mpls traffic-eng
Step 3
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-mpls-te)# interface POS 0/6/0/0
Step 4
auto-tunnel backup
Example:
RP/0/RSP0/CPU0:router(config-mpls-te-if)# auto-tunnel backup
Step 5 attribute-set attribute-set-name
Example:
RP/0/RSP0/CPU0:router(config-mpls-te-if-auto-backup)#attribute-set
ab
Step 6 Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
170
Implementing MPLS Traffic Engineering
Purpose
Enters global configuration mode.
Enters MPLS-TE configuration mode.
Enables traffic engineering on a specific
interface on the originating node.
Enables an auto-tunnel backup feature for
the specified interface.
You cannot configure the static
Note
backup on the similar link.
Configures attribute-set template for
auto-tunnel backup tunnels.
commit—Saves the configuration changes
and remains within the configuration
session.
end—Prompts user to take one of these
actions:
• Yes— Saves configuration changes
and exits the configuration session.
OL-28381-02