Cisco ASR 9000 Series Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 9000 Series
  6. Manual
Cisco ASR 9000 Series Manual

Cisco ASR 9000 Series Manual

Preparing for installation
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Configuration Manual
Preparing for Installation
This chapter provides preinstallation information, such as recommendations and requirements you should
be perform before installing your Cisco ASR 9000 Series Router.
The shipping package for the router is engineered to reduce the chances of product damage associated with
routine material handling experienced during shipment:
• Always transport or store the router in its shipping package in the upright position.
• Keep the router in the shipping container until you have determined the installation site.
Inspect all items for shipping damage. If an item appears damaged, contact a Cisco customer service
representative immediately.
•
Preparing for Installation
This chapter provides preinstallation information, such as recommendations and requirements you should be
perform before installing your Cisco ASR 9000 Series Router.
The shipping package for the router is engineered to reduce the chances of product damage associated with
routine material handling experienced during shipment:
• Always transport or store the router in its shipping package in the upright position.
• Keep the router in the shipping container until you have determined the installation site.
Inspect all items for shipping damage. If an item appears damaged, contact a Cisco customer service
representative immediately.
Safety Guidelines
Before you perform any procedure in this guide, you must review the safety guidelines in this section to avoid
injuring yourself or damaging the equipment.
Note that this section contains guidelines and do not include every potentially hazardous situation. When you
install a router, always use common sense and caution.
Preparing for Installation, page 1
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
1

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 9000 Series

Summary of Contents for Cisco ASR 9000 Series

  • Page 1 • Always transport or store the router in its shipping package in the upright position. • Keep the router in the shipping container until you have determined the installation site. Inspect all items for shipping damage. If an item appears damaged, contact a Cisco customer service representative immediately.

  • Page 2: General Safety Guidelines

    Statement 70 Energy Hazard The Cisco ASR 9000 Series Routers can be configured for a DC power source. Do not touch terminals while they are live. Observe the following warning to prevent injury.

  • Page 3: Preventing Electrostatic Discharge Damage

    Before you perform any procedure in this guide, attach an ESD-preventive strap to your wrist and connect the leash to the chassis as shown in the figure below. Figure 1: Connecting an ESD-Preventive Wrist Strap to the Cisco ASR 9001 Router Chassis Location of chassis socket for ESD strap on the Cisco...

  • Page 4: Lifting Guidelines

    Site Requirement Guidelines Lifting Guidelines Fully configured Cisco ASR 9000 Series Routers can weigh as much as 1038 pounds (470.28 kg), and an empty chassis weighs up to 300 pounds (136 kg). These systems are not intended to be moved frequently.
  • Page 5 • To mount the router in a 4-post rack, the usable aperture (the width between the inner edges of the two mounting flanges) must be at least 17.75 inches (45.09 cm) for the Cisco ASR 9922 Router or Cisco ASR 9912 Router.
  • Page 6 Preparing for Installation Site Requirement Guidelines Cisco ASR 9910 Router Chassis Footprint and Dimensions—Top-Down View figure below shows the top-down view chassis dimensions of the Cisco ASR 9910 Router. Cisco ASR 9922 Router Chassis Footprint and Dimensions—Top-Down View figure below shows the top-down view chassis dimensions of the Cisco ASR 9922 Router.
  • Page 7 Preparing for Installation Site Requirement Guidelines Cisco ASR 9912 Router Chassis Footprint and Dimensions—Top-Down View figure below shows the top-down view chassis dimensions of the Cisco ASR 9912 Router. Figure 2: Cisco ASR 9010 Router Chassis Footprint and Dimensions — Top-Down View Figure 3: Cisco ASR 9006 Router Chassis Footprint and Dimensions —...
  • Page 8 Preparing for Installation Site Requirement Guidelines Figure 4: Cisco ASR 9904 Router Chassis Footprint and Dimensions — Top-Down View Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 9 Preparing for Installation Site Requirement Guidelines Figure 5: Cisco ASR 9910 Router Chassis Footprint and Dimensions — Top-Down View Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 10 Preparing for Installation Site Requirement Guidelines Figure 6: Cisco ASR 9922 Router Chassis Footprint and Dimensions — Top-Down View Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 11 Preparing for Installation Site Requirement Guidelines Figure 7: Cisco ASR 9912 Router Chassis Footprint and Dimensions — Top-Down View Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...

  • Page 12: Site Wiring Guidelines

    • Strong EMI, especially when caused by lightning or radio transmitters. EMI can destroy the signal drivers and receivers in the router, and can even create an electrical hazard by conducting power surges through lines and into equipment. Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...

  • Page 13: Chassis Air Flow Guidelines

    Chassis Air Flow Guidelines This table describes how cool air is circulated through the Cisco ASR 9000 Series Routers. Table 1: Chassis Air Flow Guidelines Router Type...
  • Page 14 Cisco ASR 9912 Air is circulated by two fan trays located on upper rear side of chassis as shown Figure 13: Air Flow Path through the Cisco ASR 9912 Router—Side View , on page The fan trays maintain acceptable operating temperatures for the internal components by drawing in cool air through the air filter, and circulating the air through the card cage.
  • Page 15 Note requirements for installation in an enclosed 4-post rack. Figure 8: Air Flow Path through the Cisco ASR 9010 Router — Side View Figure 9: Air Flow Path through the Cisco ASR 9006 Router — Front View Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 16 Preparing for Installation Site Requirement Guidelines Figure 10: Air Flow Path through the Cisco ASR 9904 Router — Front View Figure 11: Air Flow Path through the Cisco ASR 9910 Router — Side View Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 17 Preparing for Installation Site Requirement Guidelines Figure 12: Air Flow Path through the Cisco ASR 9922 Router — Side View Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 18 Preparing for Installation Site Requirement Guidelines Figure 13: Air Flow Path through the Cisco ASR 9912 Router — Side View Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...

  • Page 19: Rack-Mounting And Air Flow Clearance Guidelines

    Rack-Mounting and Air Flow Clearance Guidelines The Cisco ASR 9010 Router, Cisco ASR 9006 Router, Cisco ASR 9904 Router, and Cisco ASR 9910 Router can be installed in most 2-post, 4-post, or telco-style 19-inch equipment racks that comply with the Electronics Industries Association (EIA) standard for equipment racks (EIA-310-D).
  • Page 20 Preparing for Installation Site Requirement Guidelines The Cisco ASR 9922 Router and Cisco ASR 9912 Router can be mounted only in a 4-post rack. The rack Note must have at least two posts with mounting flanges to mount the router chassis. The distance between the center lines of the mounting holes on the two mounting posts must be 18.31 inches ±...
  • Page 21 Preparing for Installation Site Requirement Guidelines The mounting brackets on the Cisco ASR 9006 Router chassis have a pair of holes at the top and bottom Note of each bracket; the remaining openings in the brackets are slots. When mounting the router in a 2-post rack, you must first use the holes to locate and position the brackets on the rack.
  • Page 22 Preparing for Installation Site Requirement Guidelines Figure 17: Cisco ASR 9904 Router Mounted in a 2-Post Rack Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 23 Preparing for Installation Site Requirement Guidelines Figure 18: Cisco ASR 9910 Router Mounted in a 2-Post Rack Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 24 • Two rear mounting brackets are provided for mounting the Cisco ASR 9010 Router in a 4-post rack. • Two rear mounting brackets and two bottom guide rails are provided for mounting the Cisco ASR 9922 Router and Cisco ASR 9912 Router in a 4-post rack.
  • Page 25 Preparing for Installation Site Requirement Guidelines • Rear brackets are not provided for mounting the Cisco ASR 9904 Router in a 4-post rack. Figure 19: Mounting the Cisco ASR 9910 Router in an Open 4-Post Rack Figure 20: Mounting the Cisco ASR 9912 Router in an Open 4-Post Rack...
  • Page 26 Preparing for Installation Site Requirement Guidelines Figure 21: Mounting the Cisco ASR 9922 Router in an Open 4-Post Rack Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 27 4-post enclosed rack with perforated sides and two mounting posts in the front. Do not install the Cisco ASR 9000 Series Router in any type of fully enclosed rack that does not have the Caution required perforated sides or doors; the router requires an unobstructed flow of cooling air to maintain acceptable operating temperatures for its internal components.
  • Page 28 Site Requirement Guidelines Cisco ASR 9006 Clearance Requirements To install a Cisco ASR 9006 Router in a 4-post enclosed cabinet: • The front and rear doors of the cabinet must be removed or be perforated with a minimum open area of 70 percent.
  • Page 29 Preparing for Installation Site Requirement Guidelines This figure shows the side and rear chassis air-flow clearance requirements for mounting the Cisco ASR 9006 Router in a 4-post enclosed rack. Figure 22: Cisco ASR 9006 Router Clearance Requirements for an Enclosed 4-Post Rack Installation...
  • Page 30 Preparing for Installation Site Requirement Guidelines This figure shows the side and rear chassis air-flow clearance requirements for mounting the Cisco ASR 9010 Router in a 4-post enclosed rack. Figure 23: Cisco ASR 9010 Router Clearance Requirements for an Enclosed 4-Post Rack Installation...
  • Page 31 Preparing for Installation Site Requirement Guidelines This figure shows the side and rear chassis air-flow clearance requirements for mounting the Cisco ASR 9904 Router in a 4-post enclosed rack. Figure 24: Cisco ASR 9904 Router Clearance Requirements in a 4-Post Rack Installation...
  • Page 32 Cisco ASR 9912 Clearance Requirements To install the Cisco ASR 9912 Router in a 4-post enclosed cabinet: • The front and rear doors of the cabinet must be removed or be perforated with a minimum open area of 70 percent open area (80 percent for 800-mm racks) •...
  • Page 33 This figure shows the side and rear chassis air-flow clearance requirements for mounting the router in a 4-post enclosed rack. Figure 25: Cisco ASR 9912 Router Clearance Requirements in a 4-Post Rack Installation Cisco ASR 9922 Clearance Requirements To install the Cisco ASR 9922 Router in a 4-post enclosed cabinet: •...
  • Page 34 ◦ Rear: Minimum of 10 inches (25.4 cm) of clearance. ◦ Sides: Minimum of 2.87 inches (7.28 cm) clearance on each side of the chassis. This figure shows the clearance requirements for mounting the Cisco ASR 9922 Router in a 4-post enclosed rack.

  • Page 35: Temperature And Humidity Guidelines

    Ensure all power connection wiring conforms to the rules and regulations in the National Electrical Code (NEC) as well as local codes. Each Cisco ASR 9000 Series Router is powered by only one type of input: AC or DC. A hybrid (AC+DC) Caution power configuration is not supported.
  • Page 36 National Electrical Code (NEC) and any local codes. For a list of the nominal and acceptable value ranges for source AC power, see Cisco ASR 9000 Series Routers AC Electrical Specifications section of Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide.
  • Page 37 20 A, 250 V Figure 43: AC Power Cord PWR-CAB-AC-USA=, on page 44 Australia PWR-CAB-AC-AUS= 13.9 ft (4.3 m) 16 A, 250 V Figure 44: AC Power Cord PWR-CAB-AC-AUS=, on page 45 Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 38 Figure 49: AC Power Cord PWR-CAB-AC-SUI= , on page 46 Japan PWR-CAB-AC-JPN= 13.9 ft (4.3 m) 20 A, 250 V Figure 50: AC Power Cord PWR-CAB-AC-JPN= , on page 47 Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 39 36. Note that an AC power cord may be used with several power supplies. Figure 27: AC Power Cord CAB-7513ACA= Figure 28: AC Power Cord CAB-AC-16A-AUS Figure 29: AC Power Cord CAB-AC16A-CH= Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 40 Preparing for Installation Site Requirement Guidelines Figure 30: AC Power Cord CAB-7513ACE= Figure 31: AC Power Cord CAB-2500W-EU= Figure 32: AC Power Cord CAB-AC-2500W-EU= Figure 33: AC Power Cord CAB-AC-2500W-INT= Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 41 Preparing for Installation Site Requirement Guidelines Figure 34: AC Power Cord CAB-AC-2500W-ISRL= Figure 35: AC Power Cord CAB-7513ACI= Figure 36: AC Power Cord CAB-AC-2500W-US1= Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 42 Preparing for Installation Site Requirement Guidelines Figure 37: AC Power Cord CAB-AC-C6K-TWLK= Figure 38: AC Power Cord CAB-7513ACSA= Figure 39: AC Power Cord CAB-ACS-16= Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 43 Preparing for Installation Site Requirement Guidelines Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 44 Power Cord Options for Version 2 and Version 3 Power System , on page Figure 40: AC Power Cord PWR-CAB-AC-CHN= Figure 41: AC Power Cord PWR-CAB-AC-EU= Figure 42: AC Power Cord PWR-CAB-AC-ISRL= Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 45 Preparing for Installation Site Requirement Guidelines Figure 43: AC Power Cord PWR-CAB-AC-USA= Figure 44: AC Power Cord PWR-CAB-AC-AUS= Figure 45: AC Power Cord PWR-CAB-AC-ITA= Figure 46: AC Power Cord PWR-CAB-AC-BRA= Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 46 Preparing for Installation Site Requirement Guidelines Figure 47: AC Power Cord PWR-CAB-AC-SA= Figure 48: AC Power Cord PWR-CAB-AC-UK= Figure 49: AC Power Cord PWR-CAB-AC-SUI= Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 47 Power redundancy requirements vary based on the system configuration (number and type of line cards, etc.). DC-powered systems are N+1 protected. A minimum of two power supplies are required for redundant operation. Refer to the Cisco ASR 9000 Power Calculator to determine actual redundancy requirements for any given configuration. See: http://tools.cisco.com/cpc/launch.jsp.
  • Page 48 Ensure that there is a readily accessible disconnect device incorporated in the building’s installation wiring. Circuit breaker and fuse lockout procedures should follow the rules and regulations in the National Electrical Note Code (NEC) and any local codes. Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 49 Figure 54: Typical Plastic Safety Cover over the Power Tray Connection Terminals—Version 2 and Version 3 Power System, on page 52 shows the plastic safety cover for the version 2 and version 3 DC power tray connection terminals. Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 50 DC power source cable connections for a version 3 single DC power module, in this case, a module installed in slot M3 of the power tray. The DC power trays and power modules for the Cisco ASR 9000 Series Routers are identical, so the Note examples shown in the below figures apply to all of these routers.
  • Page 51 Figure 52: Typical Source DC Power Cabling Scheme for a Single DC Power Module — Version 1 Power System Figure 53: Typical Source DC Power Cabling Scheme for a Single DC Power Module — Version 2 Power System Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 52 Figure 54: Typical Plastic Safety Cover over the Power Tray Connection Terminals — Version 2 and Version 3 Power System Figure 55: Typical Source DC Power Cabling Scheme for a Single DC Power Module — Version 3 Power System Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 53 For a list of the nominal and acceptable value ranges for source DC power, see Technical Specifications chapter from Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...

  • Page 54: Nebs Supplemental Unit Bonding And Grounding Guidelines

    AC or DC power modules. Figure 56: NEBS Bonding and Grounding Points on the Cisco ASR 9006 Router Chassis NEBS grounding point on right side...
  • Page 55 Preparing for Installation Site Requirement Guidelines Figure 57: NEBS Bonding and Grounding Point on the Cisco ASR 9006 Router Chassis NEBS grounding point on right side NEBS grounding point on rear of the NEBS grounding point on left side of...
  • Page 56 Preparing for Installation Site Requirement Guidelines Figure 59: NEBS Bonding and Grounding Point on the Cisco ASR 9912 Router NEBS grounding point near bottom, rear, right side of the chassis Figure 60: NEBS Bonding and Grounding Point on the Cisco ASR 9922 Router...

  • Page 57: Rsp And Rp Port Connection Guidelines

    • One grounding wire. Although we recommend at least #6 AWG multistrand copper wire, the wire diameter and length depend on your router location and site environment. These parts are not available from Cisco, but they are available from commercial vendors. Note...
  • Page 58 Input/Output Description Output Request to send Output Data terminal ready Output Transmit data — Signal ground — Signal ground Input Receive data Input Data set ready Input Clear to send Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...

  • Page 59: Management Lan Ports Connection Guidelines

    BI_DC– Receive– BI_DB– Unused BI_DD+ Unused BI_DD– Management LAN Port LED Indicators The Management LAN connectors have integral LED indicators. When lit, these LEDs indicate: • Green (LINK)—Connection is alive. Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 60 Figure 62: Straight-Through Cable Pinout to a Hub, Repeater or Switch When connecting the RJ-45 port to a router, use the crossover cable pinout as shown in the below figure. Figure 63: Crossover Cable Pinout Between RSPs/RPs Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...

  • Page 61: Alarm Connection Guidelines

    NO (normally open) connected to CM (common) during a Critical alarm Major alarm NC NC (normally closed) connected to CM (common) when there is no Major alarm Major alarm CM Common Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...

  • Page 62: Sync Port Connection Guidelines

    When lit, these LEDs indicate for BITS: • Green (LINK)—Connection is alive. • Amber (FAULT)—A fault has occurred. When lit, these LEDs indicate for UTI: • Green (NORMAL)—UTI is operating in normal mode. Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...

  • Page 63: Sfp/Sfp+ Port

    The RSP-440, RSP-440 Lite, RSP880-LT, and RSP-880 have a Time of Day (ToD) port, 10-MHz connector, and 1-PPS connector that allow you to configure input or output clocking with a GPS device. Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide...
  • Page 64 RSP Compact Flash Slot The Cisco ASR 9000 Series Router RSP cards support a single ATA/IDE type I/II compact flash external slot accessible on the front panel. The compact flash slot has a door that can be closed whether a compact flash device is present or not.

Table of Contents