Configuration Examples For Implementing Mpls Ldp; Configuring Ldp With Graceful Restart: Example; Configuring Ldp Discovery: Example; Configuring Ldp Link: Example - Cisco ASR 9000 Series Configuration Manual

Configuration Examples for Implementing MPLS LDP

Command or Action
Configuration Examples for Implementing MPLS LDP
These configuration examples are provided to implement LDP:

Configuring LDP with Graceful Restart: Example

The example shows how to enable LDP with graceful restart on the POS interface 0/2/0/0.
mpls ldp
graceful-restart
interface pos0/2/0/0
!

Configuring LDP Discovery: Example

The example shows how to configure LDP discovery parameters.
mpls ldp
router-id loopback0
discovery hello holdtime 15
discovery hello interval 5
!
show mpls ldp parameters
show mpls ldp discovery

Configuring LDP Link: Example

The example shows how to configure LDP link parameters.
mpls ldp
interface pos 0/1/0/0
!
!
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
52
Implementing MPLS Label Distribution Protocol
Purpose
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without committing
the configuration changes.
OL-28381-02