Configuring The Pseudowire Class - Cisco ASR 9000 Series Configuration Manual

Configuring the Pseudowire Class

Command or Action
Configuring the Pseudowire Class
When you create the pseudowire class, you specify the parameters of the pseudowire, such as the use of the
control word and preferred path.
SUMMARY STEPS
1. configure
2. l2vpn
3. pw-class name
4. encapsulation mpls
5. preferred-path interface tunnel-tp tunnel-number
6. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
320
Purpose
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Purpose
Enters global configuration mode.
Enters L2VPN configuration mode.
Implementing MPLS Transport Profile
OL-28381-02