Cisco ASR 9000 Series Configuration Manual page 283

Implementing MPLS Traffic Engineering
SRLG: N/A, NHOP-only: No
Attribute-set: ab
Auto-tunnel backup recreate time remaining:
*tunnel-te3000
* = automatically created backup tunnel
This example shows the details about all the tunnels that are using auto-mesh type of attribute-set.
RP/0/RSP0/CPU0:router# show mpls traffic-eng tunnels attribute-set auto-mesh all
Name: tunnel-te3501
Status:
Admin:
path option 10,
G-PID: 0x0800 (derived from egress interface properties)
Bandwidth Requested: 100 kbps
Creation Time: Tue Aug 14 23:25:41 2012 (00:06:13 ago)
Config Parameters:
Bandwidth:
Number of affinity constraints: 2
Metric Type: TE (default)
Hop-limit: disabled
AutoRoute: disabled
Forwarding-Adjacency: disabled
Loadshare:
Auto-bw: disabled
Fast Reroute: Enabled, Protection Desired: Node, Bandwidth
Path Protection: Not Enabled
Attribute-set: am (type auto-mesh)
Soft Preemption: Disabled
Auto-tunnel Mesh:
Group ID: 1
Destination list: blah
Unused removal timeout: not running
History:
Tunnel has been up for: 00:06:13 (since Tue Aug 14 23:25:41 EST 2012)
Current LSP:
Path info (OSPF 100 area 16909060):
Node hop count: 2
Hop0: 23.9.0.2
Hop1: 12.9.0.2
Hop2: 12.9.0.1
Hop3: 1.1.1.1
Name: tunnel-te3502
Status:
Admin:
path option 10,
G-PID: 0x0800 (derived from egress interface properties)
Bandwidth Requested: 100 kbps
Creation Time: Tue Aug 14 23:25:41 2012 (00:06:13 ago)
Config Parameters:
Bandwidth:
Number of affinity constraints: 2
Metric Type: TE (default)
Hop-limit: disabled
AutoRoute: disabled
Forwarding-Adjacency: disabled
Loadshare:
OL-28381-02
NHOP : out i/f:
Destination: 1.1.1.1 (auto-tunnel mesh)
up Oper: up
type dynamic
100 kbps (CT0) Priority:
Include bit map : 0x8
Include name : yellow
Exclude bit map : 0x2
Exclude name : red
LockDown: disabled
0 equal loadshares
Uptime: 00:06:13 (since Tue Aug 14 23:25:41 EST 2012)
Destination: 2.2.2.2 (auto-tunnel mesh)
up Oper: up
type dynamic
100 kbps (CT0) Priority:
Include bit map : 0x8
Include name : yellow
Exclude bit map : 0x2
Exclude name : red
LockDown: disabled
0 equal loadshares
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configure the MPLS-TE Auto-Tunnel Backup: Example
timer not running
Gi0/2/0/2
Path: valid Signalling: connected
(Basis for Setup, path weight 2)
CT0
2 2
Policy class: not set
Path: valid Signalling: connected
(Basis for Setup, path weight 1)
CT0
2 2
Policy class: not set
Admin: up Oper: up
267