How To Implement Gmpls Uni - Cisco ASR 9000 Series Configuration Manual

How to Implement GMPLS UNI

• improved IP availability through pro-active protection.
How to Implement GMPLS UNI
A new submode is introduced under the main TE submode to enable GMPLS UNI and to contain GMPLS
UNI configuration.
To implement GMPLS UNI, follow these procedures:
Configuring TE for GMPLS UNI
TE configuration specific to packet tunnels does not affect GMPLS UNI tunnels.
To implement TE configuration for GMPLS UNI, follow these procedures:
Enabling GMPLS UNI Submode
Perform this task to enable GMPLS UNI configuration submode and to configure GMPLS UNI tunnels.
Removal of the GMPLS UNI submode results in the removal of all configuration within it, including any
Note
other parser submode, and the immediate destruction of all GMPLS UNI tunnels.
SUMMARY STEPS
1. configure
2. mpls traffic-eng
3. gmpls optical-uni
4. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 mpls traffic-eng
Example:
RP/0/RSP0/CPU0:router(config)# mpls
traffic-eng
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
280
Purpose
Enters global configuration mode.
Enters MPLS-TE configuration mode.
Implementing GMPLS UNI
OL-28381-02