Cisco ASR 9000 Series Configuration Manual page 323

Aggregation services router mpls
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Implementing MPLS OAM
'X' - unknown return code, 'x' - return code 0, 'd' - DDMAP
Type escape sequence to abort.
Request #1
! reply addr 192.168.222.2
! reply addr 192.168.140.2
! reply addr 192.168.170.1
Success rate is 100 percent (3 received replies/3 expected replies),
round-trip min/avg/max = 105/178/237 ms
RP/0/RSP0/CPU0:router# show mpls traffic-eng tunnels p2mp 10
Mon Apr 12 12:13:55.075 EST
Signalling Summary:
Name: tunnel-mte10
Status:
Admin: up
Config Parameters:
History:
Current LSP:
OL-28381-02
LSP Tunnels Process:
RSVP Process:
Forwarding:
Periodic reoptimization:
Periodic FRR Promotion:
Auto-bw enabled tunnels:
Oper: up (Up for 12w4d)
Bandwidth: 0 kbps (CT0) Priority: 7 7 Affinity: 0x0/0xffff
Metric Type: TE (default)
Fast Reroute: Not Enabled, Protection Desired: None
Record Route: Not Enabled
Destination summary: (3 up, 0 down, 0 disabled) Affinity: 0x0/0xffff
Auto-bw: disabled
Destination: 11.0.0.1
State: Up for 12w4d
Path options:
path-option 1 dynamic
Destination: 12.0.0.1
State: Up for 12w4d
Path options:
path-option 1 dynamic
Destination: 13.0.0.1
State: Up for 12w4d
Path options:
path-option 1 dynamic
Reopt. LSP:
Last Failure:
LSP not signalled, identical to the [CURRENT] LSP
Date/Time: Thu Jan 14 02:49:22 EST 2010 [12w4d ago]
lsp-id: 10002 p2mp-id: 10 tun-id: 10 src: 10.0.0.1 extid: 10.0.0.1
LSP up for: 12w4d
Reroute Pending: No
Inuse Bandwidth: 0 kbps (CT0)
Number of S2Ls: 3 connected, 0 signaling proceeding, 0 down
S2L Sub LSP: Destination 11.0.0.1 Signaling Status: connected
S2L up for: 12w4d
Sub Group ID: 1 Sub Group Originator ID: 10.0.0.1
Path option path-option 1 dynamic
Path info (OSPF 1 area 0)
192.168.222.2
11.0.0.1
S2L Sub LSP: Destination 12.0.0.1 Signaling Status: connected
S2L up for: 12w4d
Sub Group ID: 2 Sub Group Originator ID: 10.0.0.1
Path option path-option 1 dynamic
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configure the Ping and Traceroute: Example
running
running
enabled
every 3600 seconds, next in 654 seconds
every 300 seconds, next in 70 seconds
0 (disabled)
[active]
[active]
[active]
(path weight 1)
(path weight 2)
307

Advertisement

Table of Contents
loading

Table of Contents