Configuring Xro Attribute-Set - Cisco ASR 9000 Series Configuration Manual

Implementing GMPLS UNI

Configuring XRO Attribute-set

Perform this task to configure XRO attribute set in the GMPLS UNI tunnel path-option, under MPLS-TE
submode.
SUMMARY STEPS
1. configure
2. mpls traffic-eng
3. gmpls optical-uni
4. controller dwdm interface
5. tunnel-properties
6. path-option 10 no-ero [xro-attribute-set name ] lockdown
7. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
mpls traffic-eng
Example:
RP/0/RSP0/CPU0:router(config)# mpls
traffic-eng
Step 3
gmpls optical-uni
Example:
RP/0/RSP0/CPU0:router(config-mpls-te)# gmpls
optical-uni
Step 4 controller dwdm interface
Example:
RP/0/RSP0/CPU0:router(config-te-gmpls)#
controller dwdm 0/1/0/1
Step 5
tunnel-properties
Example:
RP/0/RSP0/CPU0:router(config-te-gmpls-cntl)#
tunnel-properties
OL-28381-02
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Purpose
Enters global configuration mode.
Enters MPLS-TE configuration mode.
Enters GMPLS UNI configuration submode.
Enters GMPLS UNI controller submode.
Enters the submode to configure tunnel-specific information
for a GMPLS UNI controller.
Configuring TE for GMPLS UNI
287